Grandstream Networks HandyTone-496 Manuel d'utilisateur télécharger pdf (Page 6)

HandyTone-496 User Manual Grandstream Networks, Inc.

HandyTone-496 has two FXS ports. The PHONE1 port next to the LAN is FXS port 1 and the

PHONE2 on the side of the HandyTone-496 is FXS port 2. Each FXS port can have a separate SIP

account. This is a key feature of HandyTone-496. Both ports can make calls concurrently.

Following are the steps to install a HandyTone-496:

1. Connect a standard touch-tone analog telephone (or fax machine) to PHONE1 port.

2. Connect another standard touch-tone analog telephone (or fax machine) to PHONE2 port.

3. Insert the Ethernet cable into the WAN port of HandyTone-496 and connect the other end of

the Ethernet cable to an uplink port (a router or a modem, etc.)

4. Connect a PC to the LAN port of HandyTone-496.

5. Insert the power adapter into the HandyTone-496 and connect it to a wall outlet.

Please follow the instructions in section 6.2.1 to configure the HandyTone-496.

1 2 3 4 5 6 7 8 9 10 11 ... 40 41

Pas de commentaire

Grandstream Networks HandyTone-496 Manuel d'utilisateur Page 6